The Best Way To Put Laminate Flooring Down?

Table of Contents

Laminate Flooring is a great choice for a DIY makeover! But what is the best way to put laminate flooring down? Even if you’re new to DIY projects, laminate flooring is a fantastic option because it’s achievable for most people. This guide will cover everything that you must know, including the necessary tools, as well as how to go about everything step by step, to avoid any common mistakes. By the end of this, you’ll be a laminate-laying pro! Let’s get started!

 

Best Way To Put Laminate Flooring Down

There is no best way to put laminate flooring down, but there are some key steps for a successful installation. First, you’ll want a smooth, clean subfloor. Then, you click the planks together using a locking system. For a professional-looking finish, plan out your layout and stagger the plank seams. Looking for a more detailed guide to the steps to lay laminate flooring? Let’s do that!

Call us now at (832) 607-9159!

Call us now at (832) 607-9159!

Laminate Flooring Steps Installation: A Step-by-Step Guide

Now that you’re armed and prepped, let’s delve into the laminate flooring steps installation :

Subfloor Preparation: 

It’s vital to ensure your subfloor (the existing floor beneath the laminate) is clean, level, dry, and free of debris. Remove old carpeting, repair any cracks, and sand down uneven areas. Use a moisture meter to verify the subfloor’s moisture content falls within the manufacturer’s recommendations.

Acclimatization: 

One of the essential steps in the best way to put laminate flooring down is to get your laminate flooring acquainted with its new home! Let the unopened boxes rest in the installation room for 48 hours with average temperature and humidity. This allows the planks to adjust to the environment, minimizing post-installation expansion or contraction.

Underlayment Installation: 

Spread the underlayment throughout the room, following the manufacturer’s instructions. Underlayment usually comes in rolls and requires seams to be taped together for a continuous barrier.

Planning the Layout: 

Plank orientation plays a significant role in aesthetics according to the best way to put laminate flooring down. Typically, planks run parallel to the longest wall in the room for a more spacious feel. Sketch a layout plan to minimize waste and ensure a visually pleasing distribution of plank patterns.

First Row Installation: 

Start with a full plank along a straight wall. Remember to leave an expansion gap (usually 8-10mm) between the plank and the wall using spacer wedges. Snaplock flooring installation comes into play now as the best way to put laminate flooring down. Angle the groove of the next plank against the existing plank’s tongue and tap it gently with the tapping block and rubber mallet to secure the connection. Repeat this process, ensuring each plank clicks securely into place.

Subsequent Rows: 

For the second row, you’ll likely need to cut the first plank to maintain a staggered pattern (avoid short ends aligning consecutively). Snaplock flooring installation continues here; angle the groove of the cut plank against the long side of the previously installed plank in the first row and tap it into place. So, snaplock flooring installation is ultimately the best way to put laminate flooring down.

Cutting Planks: 

For jambs, pipes, or corners use the Jigsaw or miter saw to get the exact measurements in the best way to put laminate flooring down. Ensure your cuts are clean and allow for the expansion gap.

Door Jambs and Transitions: 

Once you reach doorways, undercut the door jambs with a saw to accommodate the laminate flooring’s thickness. You’ll likely need transition pieces (like T-molding) to connect laminate flooring to different flooring types in adjoining rooms.

Final Touches: 

After completing the best way to put laminate flooring down, remove the spacer wedges and install trim around the baseboards to cover the expansion gap and create a finished look.

Cleaning and Maintenance: 

Laminate flooring is relatively low-maintenance. Regularly use a soft brush attachment to sweep or vacuum. Clean spills promptly with a damp mop and a manufacturer-approved cleaning solution.

By following this easy way to install laminate flooring, you are already halfway to a perfect laminate floor.

 

Common Mistakes When Laying Laminate Flooring

There’s no single best way to put laminate flooring down without any mistakes. We’ve all been there – excited about a DIY project and rushing into things. With laminate floors, a little extra planning can save you a ton of frustration later on. Here are a few things people forget the most:

  • Leave room for the floor to breathe: It’s super important to leave a small gap around the edges as the best way to put laminate flooring down because they shrink and grow with the seasons.
  • Tape down that underlayment: You know that bumpy feeling under a rug? You don’t want that under your laminate! Before the actual installation of flooring, make sure the subfloor is nice and even. Tape down the seams to make sure they stay put, so your finished floor feels amazing underfoot.
  • Give your floors some getting-used-to-time: You should not carry out the best way to put laminate flooring down right away after getting the planks. Instead, make sure that they are well-acclimatized by letting them sit in the room for a day or two. This makes the floorboards adapt to the particular conditions of your space. Consequently, they won’t shrink or expand down the road and leave gaps between the boards.

Things You Need to Install Laminate Flooring

The first step to the best way to put laminate flooring down is to prepare the tools. So, let’s get you prepped on the supplies you’ll likely need.

  • Laminate flooring
  • Underlayment
  • Jigsaw
  • Rubber Mallet
  • Tapping Block
  • Pull Bar
  • Tape Measure and Pencil
  • Combination Square
  • Sliding T-Bevel
  • Utility knife
  • Spacer wedges
  • Safety gear; goggles and gloves

The good news is, you don’t necessarily need to buy everything on this list! There are laminate flooring installation kits available for around $20 that come with some of the specialty tools you’ll need to get the job done.

Next up, the best way to put laminate flooring down step by step!

 

Reliable Brothers Remodeling Can Help With Your Laminate Flooring Installation

Replacing your floors with laminate is a good move, but it could be overwhelming and appear as a huge task. The good news is, you don’t have to go it alone! Reliable Brothers Remodeling can help you with experienced, independent installers to handle the best way to put laminate flooring down, from measuring and estimating the cost to getting the flooring delivered and perfectly installed.

So, whether you love the classic look of laminate wood or want to explore other options, Reliable Brothers Remodeling has a wide range of flooring installation services to match your style and needs. Browse through samples online or contact us to find the perfect fit for your home. Then, let the Reliable Brothers Remodeling take care of the rest!

Best Way To Put Laminate Flooring Down

Call us now at (832) 607-9159!

Transforming your living space with the rich beauty and practicality of laminate flooring is a dream within reach. But for DIY warriors, the question of the “best way to put laminate flooring down” can be a daunting one. That’s why we gathered up this guide to help you. However, if you want a beautiful new laminate floor but short on time? We can help! We offer a hassle-free installation service so, you can sit back and relax as your amazing new floors get set up faster.


FAQ

What Is The Best Way To Put Down Laminate Flooring?

The best way to put laminate flooring down is with a floating method. This means the planks click together and lay on top of an underlayment, not glued to the subfloor. It’s faster, easier on your joints (no kneeling!), and allows the floor to expand and contract naturally with temperature changes.

 

Can I Put Laminate Flooring Over Hardwood?

Yes, you can lay laminate over hardwood flooring in good condition! Make sure the hardwood is even and firmly attached, then put down a vapor barrier to protect it from moisture.

 

Should Laminate Flooring be Glued Down or Floating?

Laminate flooring usually uses a click-lock system for a floating installation. This means the planks connect without glue and the floor rests on the underlayment. Gluing laminate is not frequent and is used in unique conditions, like high-traffic areas, for example.


What are Some Common Mistakes When Laying Laminate Flooring?

While laminate installation is not rocket science, there are a few things you need to keep in mind. One is forgetting to leave space around the edges for the floor to expand and contract. Another is skipping the underlayment, a special padding that goes under the laminate. Not letting the flooring acclimate to the room’s temperature beforehand and installing it on an uneven surface can also cause problems down the road.

Call Us Now