Drywall Repair Large Area Achieve a Perfect Finish

Table of Contents

Let’s say you bump the wall a little too hard and end up with a big dent. Unlike smaller dings, a drywall repair large area requires a different approach for a seamless fix. While small holes can be covered with patch tape or a pre-made patch, bigger gaps need something sturdier to fill the space. However, don’t worry patching up a drywall repair large area is an achievable feat, even for DIY enthusiasts. Here’s a step-by-step guide to patching a large hole in your drywall like a pro, complete with the necessary tools.

Drywall Repair Large Area

The first step in a drywall repair large area is to assess the extent of the damage. Small holes (under 6 inches) can often be addressed with drywall tape hole repair methods. However, for larger areas, a large drywall repair patch will be required. Here’s what to consider to determine the best repair approach:

  • Size and Shape
  • Depth
  • Cause

Trust Our Team for Quality Repairs – Call Now to Schedule Your Drywall Repair Service!

The Importance of Timely Drywall Repairs

Drywall might seem like just the smooth surface you paint and decorate on, but it plays a bigger role in your home than you might think. That’s why a drywall repair large area promptly is important. Let’s look at some reasons why you shouldn’t wait to get those holes patched up or cracks addressed.

Save Your Home’s Structure: 

Drywall is a key part of your wall’s internal support system. If it gets damaged by water leaks, foundation issues, or even just bumps and bangs, it can weaken the entire wall.

Stop Mold in Its Tracks: 

The best way to prevent mold growth and keep your home safe is to address drywall problems as soon as possible.

Keep Your Wallet Happy: 

Small drywall cracks and holes might seem insignificant now, but waiting to fix them can lead to expensive and much bigger drywall repair large area problems.

Maintain Your Home’s Beauty: 

Fixing a drywall repair large area keeps your home looking sharp and can even boost its value if you’re ever thinking of selling.

So, the next time you bump a hole in the wall or notice a suspicious crack, don’t ignore it. Tackling drywall damage early on is a smart way to protect your home, your health, and your wallet.

Drywall Repair Large Area

Call Us at : (832) 607-9159

How to DIY Drywall Repair Large Area?

While drywall tape reigns supreme for smaller repairs and corner repairs, a drywall repair large area often requires a different approach. Here’s where the large drywall repair patch comes in.  This method involves cutting a piece of drywall slightly larger than the damaged area and securing it with screws and joint compound, also known as mud. 

Big Hole in Your Wall? No Sweat!

Ever bump a wall a little too hard and create a not-so-tiny hole? Don’t worry, these things happen! Patching a drywall repair large area (anything bigger than 6 inches) requires a different approach than smaller nicks. Here’s how to fix it like a pro:

Gather Your Supplies:

  • Ruler and pencil for measuring and marking
  • Saw specifically for cutting drywall (a drywall saw)
  • Tape measure
  • Wood saw (for cutting backing strips)
  • Drill with a screwdriver bit
  • Utility knife
  • Two drywall knives (one 6-inch for applying joint compound, another for smoothing)
  • Sanding sponge (150 grit)
  • Rag for cleaning
  • Paintbrush
  • Square tool for straight lines (framing square)

Patch Materials:

  • Scrap wood or plywood strips (at least 3 inches wide)
  • Matching piece of drywall (same thickness as your wall)
  • Drywall screws (coarse thread, 1 1/4 inch)
  • Mesh drywall joint tape (self-adhesive)
  • Drywall joint compound (also called mud)
  • Primer paint
  • Paint (matching your wall color)

Steps to Patching a Drywall Repair Large Area:

Now here’s a step-by-step guide to patching things up:

Step 1: Measure and Mark

First things first, grab your ruler and pencil. Make sure the hole has clean, straight edges by carefully trimming it if needed. Use the framing square to mark a square or rectangle around the hole on the drywall.

Step 2: Check for Wires! 

Safety first! Before cutting, use a flashlight to peek through the hole of your drywall repair large area and make sure there are no electrical wires or plumbing in the way.

Step 3: Cut Away

Now that it’s safe, carefully cut along the marked lines with your drywall saw. Measure the opening again to ensure a good fit for your patch.

Step 4: Backing Up Your Patch

Cut two wood strips a few inches longer than the drywall repair hole’s long sides. Place one strip inside the wall, centered on the edge of the hole, and screw it into the drywall using your drill. Repeat on the opposite side for extra support. For holes wider than 10 inches, create a complete frame using the strips.

Step 5: Patch Time! 

Cut a piece of drywall slightly larger than the hole (around 1/8 inch bigger). Place the patch over the hole and screw it securely to the backing strips. Remember, the drywall repair large area patch needs to be the same thickness as your wall (usually 1/2 inch).

Step 6: Seaming Up the Patch

Cut strips of drywall joint tape with your utility knife to the length of the seams. Place these strips over each seam so that they overlap at the corners and lay flat without wrinkles on the strips.

Step 7: Muddy Business

Here comes the joint compound in patching a drywall repair large area, also known as mud. Using your 6-inch drywall knife, spread a thin layer over the joint tape, letting the mesh show through slightly. Once dry, scrape off any bumps with the knife. Apply a second, slightly wider layer, making sure to feather the edges thinly onto the surrounding wall. Let it dry, scrape again, and repeat with a third layer. Patience is key!

Step 8: Sanding Smoothly

Once everything is completely dry over your drywall repair large area, grab your sanding sponge and gently smooth out the mud. Don’t overdo it, or you might expose the mesh tape underneath. If you prefer a less dusty approach, use a wet sanding sponge. Wipe away any dust with your rag.

Step 9: Painting the Finish Line: 

Now for the fun part! Apply a coat of primer over the entire patch of the drywall repair large area using your paintbrush. Let it dry completely. Finally, apply two or more coats of paint that match your wall. If your whole wall or ceiling needs a refresh, this is a perfect time for a complete paint job, which can also help hide the patch even more. After all, sometimes new paint appears slightly brighter than older paint, making the patch less noticeable.

Finally, there you have it! Your large hole is now a distant memory. The steps mentioned above and some patience will enable you to patch a drywall repair large area like a pro.

Drywall Repair Large Area

Call Us at : (832) 607-9159

Large or Small, Reliable Brothers Remodeling Can Fix Your Wall

Although these DIY approaches empower you to approach drywall repair projects, contact Reliable Brothers Remodeling for an extensive drywall repair large area or a flawless professional finish. Our team of skilled drywall professionals can efficiently handle all kinds of damages, no matter how big or small.

Let’s Discover the Best Value for Drywall Repair – Get Your Average Cost Estimate Now!

What Drywall Services Do We Offer?

  • Expert Assessment
  • Flawless Drywall Repair Large Area Patching
  • Crack Eradication
  • Texture Matching
  • Professional Sanding and Finishing

Call Katy’s Drywall Repair Experts

For extensive damage, a drywall repair large area patch might be necessary. Call Reliable Brothers Remodeling to avoid further damage.

FAQ

How do you fix a large area of drywall?

Fixing a drywall repair large area involves replacing the damaged section with a new piece. You’ll need to cut a patch of drywall slightly larger than the hole, secure it with wood supports behind the wall, and then mud (apply joint compound) over the seams to create a smooth finish.

How big can you patch drywall?

The size of a patchable drywall hole depends on the damage and your comfort level. Small holes may be repaired with mesh patches however large areas require the actual drywall to be replaced.

How to repair a large drywall dent?

For large drywall dents, patching might not be necessary. If the dent isn’t cracked or broken, you can try to gently push it out from behind the wall (if accessible) or use a joint compound to fill the dent and smooth it over. However, when the dent is too deep, it makes more sense to replace the section of the drywall as a permanent solution.

 

Call Us Now